Ideal for kit car builders, buggy makers and bike enthusiasts, this version of the D44 tax disc holder can be bolted in place.
With two internal gaskets, once assembled, the holder will protect your tax disc against splashes and showers. Stainless steel.

The D44 tax disc holder is made from high quality stainless steel, and features two internal gaskets to keep your tax disc protected against splashes and showers.
Supplied with 10 self-adhesive pads to attach to your windscreen.
Designed for use with a flat windscreen but comes with spare pads to allow fitment to curved screens.

High quality marine sockets have always been a great way to get auxiliary power outlets in your vehicle, and now we’ve made the job a little easier. These 3-way socket mounts provide a solid, sturdy method of installing sockets. Made from high-quality brushed stainless steel, the mount provides 8 fixings and profiled holes to ensure the sockets are located correctly.
Sockets not included.

As used on Devon 4x4's own competition vehicles, the D44 winch mount has been designed and tested for maximum strength and performance without sacrificing the looks of your vehicle.

This hi-mount version sets a Warn 8274 winch back into the grille and bolts to the original bumper mounts with supplementary fixings for security.

Cutting the grille panel is required, and trimming the wheel arches is recommended for optimum approach angle.

Supplied in black powder coat finish with all necessary fixing holes.

Not suitable for vehicles with Air Con. For Aircon and 'non-cut' variants,

This extension bracket when used in conjunction with D44 extended cranked rear radius arms allows a land Rover 90 [92.5"] to become a 100" wheel base.

Cut from 40mm thick mild steel and machine finished to allow press fit of standard ball joint.

Finshed in zinc, comes with finishing plate.

Designed to be fitted with our Defender competition winch mount (non aircon variants), the D44 steering guard provides tough protection for the steering components on the vehicle.

Shown in yellow, the guard bolts to the winch bumper with the provided fasteners, and also bolts to the vehicle chassis for maximum strength.

Designed to be fitted with our Defender competition winch mount (aircon variants), the D44 steering guard provides tough protection for the steering components on the vehicle.

Shown in yellow, the guard bolts to the winch bumper with the provided fasteners, and also bolts to the vehicle chassis for maximum strength.

D44 bumpers are known for being some of the toughest and strongest available, and this unique bumper is no exception.

This is a direct replacment Heavy Duty bumper for Defenders

The bumper features heavy duty recovery eyes and tapered ends

D44 winch mounts are known for being some of the toughest and strongest available, and this unique bumper is no exception.

Designed specifically to mount any of the Warn low line range to Land Rover Defender vehicles.

This version is designed so you dont have to trim the grill

The bumper features heavy duty recovery eyes

Add a touch of style to your Defender with our replacement side vents.

Made in tough powder coated steel and featuring an anodised diamond mesh, a variety of colour combinations are available to suit your taste.

These elegant grilles are held in place with stainless screws and are supplied with a neoprene gasket. Available for all models of Defender with a side intake.

Available in both right hand and left hand configuration for 300 Tdi / Td5 and 200 Tdi / TD vehicles.

Left hand side (Td5 / 300 Tdi) in Black with Black mesh.

Add a touch of style to your Defender with our replacement side vents.

Made in tough powder coated steel and featuring an anodised diamond mesh, a variety of colour combinations are available to suit your taste.

These elegant grilles are held in place with stainless screws and are supplied with a neoprene gasket. Available for all models of Defender with a side intake.

Available in both right hand and left hand configuration for 300 Tdi / Td5 and 200 Tdi / TD vehicles.

Left hand side (Td5 / 300 Tdi) in Black with Black mesh.

Add a touch of style to your Defender with our replacement side vents.

Made in tough powder coated steel and featuring an anodised diamond mesh, a variety of colour combinations are available to suit your taste.

These elegant grilles are held in place with stainless screws and are supplied with a neoprene gasket. Available for all models of Defender with a side intake.

Available in both right hand and left hand configuration for 300 Tdi / Td5 and 200 Tdi / TD vehicles.

Left hand side (Td5 / 300 Tdi) in silver with Silver mesh.

Add a touch of style to your Defender with our replacement side vents.

Made in tough powder coated steel and featuring an anodised diamond mesh, a variety of colour combinations are available to suit your taste.

These elegant grilles are held in place with stainless screws and are supplied with a neoprene gasket. Available for all models of Defender with a side intake.

Available in both right hand and left hand configuration for 300 Tdi / Td5 and 200 Tdi / TD vehicles.

Right hand side (Td5 / 300 Tdi) in silver with silver mesh.

The D44 competition winch mount is designed to maximise the vehicle approach angle whilst providing a strong mounting point for lowline winches such as the Warn XD9000 and 9.5XP.

Made from heavy duty steel and finished in black powder coating, the bumper incorporates two recovery eyes.

The tapered ends use a triangulated design for maximum strength in all directions without ruining the lines of the vehicle, and side protection bars ensure that the vehicle wings are guarded.

Designed and developed in house at D44 the Discovery 2 spare wheel carrier will allow up to a 36" tyre to be fitted to the rear door without fouling the bumper.

Heavy duty steel construction, finished in black powder coat.

Whether you are a 'bling-king' or you just need a way to neatly finish the panel around your competition exhaust system, the D44 exhaust finisher will be perfect for the job.

Made in stainless steel, complete with countersunk stainless fixings, this item will stay looking great for a long time.

80mm internal diameter, 120mm overall diameter.

Whether you are a 'bling-king' or you just need a way to neatly finish the panel around your competition exhaust system, the D44 exhaust finisher will be perfect for the job.

Made in stainless steel, complete with countersunk stainless fixings, this item will stay looking great for a long time.

This version of the finisher is oval in shape, 90 x 105mm to allow for movement of the pipe caused by expansion. Ideal for fitment to vehicles with long systems such as Discovery 2

The D44 stainless fair lead is a popular choice with all off roaders but anyone with a ARB bumper couldn't use one due to the fairlead holes being in the wrong place.
Now D44 have solved this problem by creating this adaptor bracket which relocates the fairlead to the correct height.
Sold without the fairlead, supplied with all fixings

Designed and re-designed in the toughest off-road competitions in the world, the D44 ground anchor brings performance like few others available.

Made for maximum adaptability in a wide range of ground conditions and tested in both the real world and on high-stress load testing beds.

The D44 ground anchor features a zinc plated, removable blade and a recovery eye at both ends for easy retraction after use.

Don't bother with the cheap imitations. Get one of the best ground anchors available for a superb price.

For serious competitors, a rear winch can be an essential piece of equipment, and mounting that winch properly is more than just a matter of looks.

The D44 competition cross member has been designed and tested in the harshest of conditions off road, and provides a tough, strong way to mount a rear winch.

The rear crossmember must be welded to the vehicle chassis rails, and replaces the standard item completely. The winch mounts in a purpose-made cradle and simply bolts into place.

The crossmember also features two integral recovery eyes for winching and towing, and wrap around ends to protect the rear tub.

Cutting of the floor is required to fit the winch, and cutting of the rear side panels is required to accomodate the wrap-around ends.

A Standard replacement Stainless steel grille for the Safari snorkle.

Comes with stainless steel fixings

Due to popular demand D44 have recreated their tubular winch mount for the Warn 8274.
Using the same 8mm mild steel winch cradle as the tapered competition mount and featuring two 20mm looped recovery eyes
Supplied in black powder coat finish with all necessary fixing holes.
Not suitable for vehicles with Air Con. For Aircon and 'non-cut' variants,

D44 competition steering guard for Discovery 1. Designed to fit with the D44 competition winch mount, the steering guard forms a tough, continuous protection plate to keep the steering components protected.

D44 competition steering guard for Discovery 2. Designed to fit with the D44 competition winch mount, the steering guard forms a tough, continuous protection plate to keep the steering components protected.

For Discovery 2 owners looking for a heavy duty winch mount that won't interfere with the vehicle capabilities off-road.

The D44 competition bumper sets the winch back into the grille of the vehicle and the slimline design gives an excellent approach angle. Finished in a tough black powder coat and with fixing holes to suit the range of Warn midframe winches.

An accompanying steering guard (pictured) is available, and we recommend the fitment of a slimline washer bottle to the vehicle. Please ask for more details

Designed to complement the lines of the Discovery 2, the D44 heavy duty rear bumper is a direct bolt-on replacement for the standard item.

The low profile rear bumper dramatically improves the departure angle of the vehicle whilst retaining the rear-end protection.

The bumper includes NAS-style rear lights, and has integrated light guards. Compatible with the standard vehicle tow pack, Southdown tank guards and other rear recovery equipment.

The bumper also features a recessed mounting panel for a single trailer socket. (Blanking panel also included)

The EGR system fitted to many diesel engines recirculates part of the exhaust gases back in to the air intake. Removing this system can help in keeping the inlet air clean and pure, keeping the inlet manifold temperature down and help to improve engine efficiency.

The D44 EGR replacement pipe allows the EGR valve of the Td5 to be completely removed from the inlet system, elimitaing the restrictions on air flow and helping the engine to breathe.

A simple, elegant solution to fitting twin batteries to a vehicle.

The D44 battery tray comes complete with fixing brackets and clamping assembly to hold the batteries securely.

Will take 2 x Odyssey PC1500 or 2 x Optima Batteries

Designed specifically to suit the 2007 model Defender, the D44 twin battery carrier bolts to existing holes in the seat base and will safely support two Optima or Odyssey PC1500 batteries.

Ideal for installing twin batteries on competition and overland vehicles.

Allows the jack to remain in the existing position

The D44 waffle holder is designed for fitment primarily for truck cab vehicles. It allows two waffles to be fitted to the rear of the tub.
Comes with fixings.

Drilling of the tub is required

The D44 waffle holder is designed for fitment primarily for truck cab vehicles. It allows two waffles to be fitted to the rear of the tub.
Comes with fixings.

Drilling of the tub is required

An essential accessory for any overland traveller with one eye on their 'angle of dangle'

These fun inclinometers provide a clear visual display of the vehicle roll and pitch angles, whilst the built-in compass will keep you heading in the right direction

An essential accessory for any overland traveller with one eye on their 'angle of dangle'

These fun inclinometers provide a clear visual display of the vehicle roll and pitch angles.

Available in black with night illumination.

Universal Use
Black finish
25cm Long universal flexible arm
Plug in and On-OFF switch
Uniform light distribution by means of reflector and diffuser

12V Ultra bright halogen lighting technology
Unique lighting distribution using reflector and defuser
Tough ABS Light housing and lens
55 cm Long Flexible goose-neck with support clip
ON/OFF switch
Needs to be wired in to vehicles electrical system

For anyone contemplating an overland trip into one of the world’s deserts, getting bogged down in sand can be a real worry. Recovery points are few and far between making winch recovery troublesome.

Sand ladders are not a new idea, having been proven time and time again by travellers around the world, becoming de-rigueur equipment for the vehicle.

‘Maxtrax’ have redesigned the concept of the sand ladder using the latest material technologies and design to make a highly effective, lightweight and usable product.

Supplied as a pair, Maxtrax have the following features :

- Super-tough engineering-grade reinforced Nylon construction.
- 1215mm long x 340mm wide x 60mm high.
- A ramp at each end for easy insertion under tyres.
- 2 rigid support beams (to bear the weight of a fully laden 4WD).
- An array of rounded 'teeth' on the top surface
- Large cleats on the bottom surface (to provide stability).
- Anchor holes at each corner for securing to slippery surfaces
- Six hand holds to permit easy carrying and positioning.
- Designed to stack on top of each other
- Two MAXTRAX stacked together are just 80mm high.
- Can be used upside down as a shovel to scoop out sand and mud.
- One set (two units), weighs less than 8kg.
- Can take full weight of a large 4WD (Patrol/Landcruiser) in very soft sand and boggy mud.
- They flex yet can still provide a firm base.
- Can perform in -30 and 50+ degree temperatures.
- Requires no jacking.
- Gripping teeth will not damage your tyres.
- Can be linked together to form a road.
- Lightweight and easy to store

The SDB-160HB uses a free curve reflector. A Free Curve reflector is very efficient because it uses the whole reflector. This allows the spot beam to illuminate approximately 235 meters ahead and the driving beam to illuminate the entire surface in front of the vehicle.

The SDB-160HB has an internal light frame to protect the lamp from vibration and shock when running off-road, plus an impact resistant polycarbonate body protects the exterior. Heat and weather resistant EPT material helps protects lamp integrity.
The lens of the SDB-160HB is protected by a stone guard in a "V"-shape to let air cool the lens surface, allowing extended operation of the lamp. Hardened glass lens has excellent heat and thermal shock resistance, strength and translucency.

Easily adjustable illumination angle to 15° up or down. Dual beam control switch includes relay control feature and LED illumination when lamps are in use.

There are many types of bridging ladder available, but the lightweight, flexible design of the waffles makes them the ideal choice for off-road work.

Don't mistake these for the cheap auction-site version... these waffles have properly formed and sealed edges, meaning they will last longer and withstand more abuse. They are longer than many on the market, measuring 1415mm from end to end.

Supplied individually and available in 2 thicknesses, 38mm and 50mm for heavy trucks.

Plasma 12 strand is the highest strength synthetic rope available. It is manufactured from Honeywell Spectra Fibre that has been enhanced by 'Puget Sound' Rope’s patented recrystallization process.

Plasma Winch Line and Winch Extension is one of the newest and most significant inventions ever made in rope manufacturing. Plasma is specially designed for winching and for wire cable replacement. Plasma winch line is 25% to 40% stronger than wire cable and is only 1/7th the weight of same size wire cable.

There are many air compressors on the market offering varying features for a variety of prices. The ARB air compressor, regarded by many to be the best, offers extremely high performance at a reasonable price.

When tackling off road conditions a strong and reliable 12-volt air compressor is a vital part of any accessory kit.

Differing terrains require varying tyre pressures for optimum performance. While releasing air isn't a problem, reinflating quite often is. A strong, fast and reliable air compressor to reinflate your before travelling back on the hard top is a must. The ARB compressor has been specifically designed for 4WD applications, where reliability and durability are paramount. The extruded aluminium cylinder bore has been hard anodised which dramatically reduces friction and heat, while the piston features Teflon impregnated carbon rings allowing or oilless operation and excellent durability.

Mounted in your vehicle with ARB’s high performance wiring loom, and utilising the optional airline accessory kit, the ARB air compressor becomes the ultimate tool.

Can be used for locking differentials, and for tyre inflation with optional pump up kit.

When used with the standard ARB compressor, the pump up kit can be used for tyre re-inflation in the field.

Comes complete with airline and fittings. Needs standard compressor

Overland travel, vehicle based expedition, and heavy winch use can take a massive strain on vehicle electrical systems. Lights, fridges, pumps and winches can quickly exhaust batteries.

To overcome this problem it has become common practice to install a second battery into the vehicle to supply greater electrical reserves.

Along with the second battery comes a need to charge it efficiently with the necessary electrical current without damaging or depleting the vehicle's existing battery and electrical system.

The Genesis Dual Battery Management System (DBMS) was developed to provide this peace of mind as man ventures into unknown territory. The Genesis DBMS can be fitted to any vehicle and will ensure that a second or auxiliary battery fitted to the vehicle will receive an optimum electrical charge without damaging or depleting the vehicle's main battery.

Using the vehicle's existing electrical charge system, the Genesis DBMS will ensure enough charge is distributed to the auxiliary battery, allowing for enough power to sustain, within reason, the need for electricity while on his expeditions into the wild.

Incorporating advanced features such as REALtime voltage tracking and Active current monitoring, the Genesis DBMS ensures that the vehicle's main and auxiliary batteries are charged optimally.

REALtime voltage tracking is a feature, unique to the Genesis DBMS. With this feature the Genesis DBMS is able to take a ‘snap-shot’ of the voltage on the vehicle's main and auxiliary battery several thousand times every second. Applying advanced filtering techniques, the REALtime voltage monitoring capability of the Genesis DBMS continuously constructs a clear picture of the condition of both the main and auxiliary battery while the system is operational. Once the Genesis DBMS has developed a clear 'picture' of the condition of both batteries, the ActiveT current monitoring feature is launched.

The ActiveT current monitoring feature establishes a safe charge pattern for efficiently charging the auxiliary battery while keeping the vehicle’s main battery sufficiently charged. The Genesis DBMS is unique in its approach to battery management. Complementing its advanced charging capability, several additional features further enhance the system.

For any situation where you need to depend on your vehicle, having batteries which will perform faultlessly is vital. Using advanced battery technology and built to the toughest military specifications, Odyssey batteries provide a unique combination of deep-cycle and high-current performance.

Using Absorbed Glass Mat technology, pure lead plates and a class-leading multi-tab internal design, the Odyssey gives unparalleled, consistent power delivery across the range.

Having incredibly low internal resistance means that the Odyssey range can be charged quickly from deep discharge, and will give better deep-cycle capability than the competition... over 50% better than it's best-known rival. Low resistance also means that the Odyssey delivers cranking current like no other. The 5 second rate from Odyssey means that even the smallest batteries can be employed on large engines, and sustained high-power requirements such as winching are easily handled without the risk of damage to the battery.

Toughness is built into every Odyssey battery at every stage of production. Pure lead plates support absorbed electrolyte giving a 'dry', leak-free sealed unit. Designed to military specifications, the Odyssey is vibration resistant and will deliver its power in extremes of temperature from the frozen wastelands to the arid desert. The batteries are even designed to provide starting current at 70% depth of discharge, so you really can depend on your Odyssey !

One of the most popular batteries in the range, the PC1500 suits many applications for deep cycle and heavy current applications. The added bonus of side terminals increases the flexibility of the battery in many different installations.

* 1500 cranking amps
* 68 Ah capacity
* Standard automotive terminals and additional side terminals
* W 276 x D 178 x H 199 mm